Features
» Available in SS316 conforms to NACE MRO1-75
» Bar stock Body in Straight Patterns
» Panel Mountable
» Variety of end configurations includes SEALEXCEL® Well-Lok Tube Fittings, Male / Female NPT, BSPT, BSPP pipe connections
» Hardened Stem Tip
» Flow coefficients (Cv) from 0.35 to 8.6
» Orifice size : 0.156" (4mm), 0.250" (6.4mm) and 0.437" (11mm)
» Every valve is factory tested.

Description	Features and Benefits
1. Anti Blow-out extended	i) Rolled and plated stem threads for excellent Stem performance & extended Stem service life. II) Non Rotating self centering stem tip for superior & repeatable perfect sealing. III) Burnished stem at packing area to ensure low torque operation of the valve & reduction in packing wear.
2. Stem Tip	Harderned Stem Tip for Excellent performance and extended service life
3. Packing Bolt	Allows packing adjustment in open or close position.
4. Packing	Packing below the threads protects the flow stream from lubricant contamination on the threads or wash out and also protect the stem threads from potential damaging effects of the media.
5. Locking Pin	To prevent accidental loosening / disassembly of valve.
6. Bonnet Lock Nut	For safety to prevent accidental loosening of packing bolt

Operating Parameters
Pressure Rating : Upto 10,000 psig (680 bar) at CWP
Temperature Rating : -54°C to 232°C with standard PTFE packing
upto 426°C with optional Graphite

Applications
» General Plant Service
» Instrument Isolations
» Hydraulic and Pneumatic
» Pressuring measurement devices
» Venting

Stem Type
SEALEXCEL® Needle Valves are available with choice of optional stem to provide greater flexibility.
NON-ROTATING (NR) : It is Standard self centering non rotating stem tip typically used in high cycle application to extend the valve life.
V-STEM (VS) : It is used for general purpose liquid and gases.
REGULATING STEM (RS) : It is used where some degree of flow control required.

Material of Constructions

No.	Component	Material
1	Bar Handle	SS316
2	Set Screw	SS316
3	Stem	SS316
4	Stem Tip Hardened	SS316
5	Packing Bolt	SS316
6	Bonnet	SS316
7	Lock Nut	SS316
8	Panel Nut	SS316
9	Packing	PTFE
10	Back-up Ring	GFT
11	Washer	SS316
12	Bonnet Safety Pin	SS316
13	Valve Body	SS316

Technical Data
The Temperature and Pressure rating for a standard valve with PTFE packing

Temperature	Pressure
	psig	bar
-50°C to 38°C	10,000	680
-50°C to 90°C	9290	632
-50°C to 145°C	8390	570
-50°C to 200°C	7705	524
-50°C to 230°C	7435	505

Testing
Standard Test : Each valve is factory tested with nitrogen at 1000 psig (69 bar) for leakage at the seat and packing, the maximum allowable leak rate of 0.1 sccm
Optional Hydrostatic Test : This test is performed with de-ionised water at 1.5 times the working pressure