High Pressure Banjo Fittings,High Pressure Banjo Fittings Manufacturers, High Pressure Banjo Fittings Exporters

Hydraulic Applications »

Hydraulic Applications

» Tube Fittings as per DIN 2353
» 37 Deg. Flared Tube Fittings as per SAE J514
» Quick Connect Couplings
» Swivel Joints

Instrumentation Applications

» Well-Lok Twin Ferrule / Fine-Lok Single

Ferrule Tube Fittings
» Precision Pipe Fittings & Adapters
» Ball Valves
» Needle Valves
» Rising Stem Plug Valves
» Gauge / Root Valves
» Purge & Bleed Valves
» Toggle Valves
» Check Valves
» Micron In Line Filters

Pneumatic Applications

» Stainless Steel Push in Fittings
» Flow Control Regulators
» Quick Exhaust Valves
» Quick Connect Couplings
» Check Valves

Utility Industries Are

» Chemicals & Petrochemicals
» Food, Beverages & Pharmaceuticals
» Hydraulics, Pneumatics & Instrumentations
» Marine
» Oil and Gas Industries
» Power Generation
» Pulp and Paper
» Semiconductor Industry
» Alternative Fuels

Events & Exhibition

High Pressure Banjo Fittings

Home >> Hydraulic Applications >> Tube Fittings as per DIN 2353 > High Pressure Banjo Fittings

General Information

Installation Instructions

Ordering Information

High Pressure Banjo Fittings - WHM

Male Stud Thread :Metric (Parallel with Metal Seal Ring DKA to DIN 3852/d4)

SERIES	TUBE O. D. T	MALE STUD THREAD BSP	Dimensions are in millimeters										RTT in Nm	SEALEXCEL PART NO.	APPROX. WT. Kg per 10pcs.
SERIES	TUBE O. D. T	MALE STUD THREAD BSP	B1	D3	H	L1	L2	L3	L4	S2	S3	S6	RTT in Nm	SEALEXCEL PART NO.	APPROX. WT. Kg per 10pcs.
L-LIGHT PN 315	6	M10x1	8	14	2.5	27	12	24	10.5	14	17	17	25	WHM-6L-10MDKA	0.65
	8	M12x1.5	12	17	3.0	29	14.5	30	14	17	22	19	50	WHM-8L-12MDKA	1.14
	10	M14x1.5	12	19	3.0	30	15.5	30	14	19	22	19	60	WHM-10L-14MDKA	1.25
	12	M16x1.5	12	21	3.0	33	18	36	16.5	22	27	24	90	WHM-12L-16MDKA	2.03
	15	M18x1.5	12	23	3.0	36	20.5	39.5	18.5	27	32	27	110	WHM-15L-18MDKA	2.85
	18	M22x1.5	14	27	4.5	37	21	45	21.5	32	32	30	150	WHM-18L-22MDKA	3.88
PN 160	22	M26x1.5	16	31	3.5	44	27.5	53	24	36	41	36	350	WHM-22L-26MDKA	6.58
	28	M33x2	18	39	3.5	49	32	66	30.5	41	50	46	400	WHM-28L-33MDKA	11.03
	35	M42x2	20	49	3.5	58	36	76	35.5	50	60	55	600	WHM-35L-42MDKA	16.63
	42	M48x2	22	55	3.5	63	40.5	87	40.5	60	70	60	800	WHM-42L-48MDKA	25.0
S Heavy PN 400	6	M12x1.5	12	17	3.0	31	16.5	30	14	17	22	19	50	WHM-6S-12MDKA	1.22
	8	M14x1.5	12	19	3.0	31	16.5	30	14	19	22	19	60	WHM-8S-14MDKA	1.32
	10	M16x1.5	12	21	3.0	35	18.5	36	16.5	22	27	24	90	WHM-10S-16MDKA	21.17
	12	M18x1.5	12	23	3.0	36	20	39.5	18.5	24	27	27	110	WHM-12S-18MDKA	2.80
	14	M20x1.5	14	25	4.5	40	22.5	43.5	20	27	32	30	130	WHM-14S-20MDKA	3.74
	16	M22x1.5	14	27	4.5	40	22	45	21.5	30	32	30	150	WHM-16S-22MDKA	3.94
	20	M27x2	16	32	3.5	48	26.5	53	24	36	41	36	350	WHM-20S-27MDKA	6.88
PN 250	25	M33x2	18	39	3.5	56	31.5	66	30.5	46	50	46	400	WHM-25S-33MDKA	12.60
	30	M42x2	20	49	3.5	64	37	76	35.5	50	60	55	600	WHM-30S-42MDKA	17.63
	38	M48x2	22	55	3.5	72	41.5	87	40.5	60	70	60	800	WHM-38S-48MDKA	29.70

RTT- Recommended tightening torque for male stud BSP
O-Ring : Buna-N is standard
Viton® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings Example : WHM-6L-10MDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change without notice.

Suffixes the following material code along with above part number while sending your enquiries / orders.

Material	Code	Example
SS316L	EL	WHM-6L-10MDKA/EL
SS304	I	WHM-6L-10MDKA/I
The material SS316Ti are available on request

Request a Quote for - High Pressure Banjo Fittings - WHM

Swagelok®, Parker A-Lok®, Parker CPI®, and Hoke Gyrolok® are the registered trademarks of their respective owners.