High Pressure Banjo Fittings,High Pressure Banjo Fittings Manufacturers, High Pressure Banjo Fittings Exporters

Hydraulic Applications »

Hydraulic Applications

» Tube Fittings as per DIN 2353
» 37 Deg. Flared Tube Fittings as per SAE J514
» Quick Connect Couplings
» Swivel Joints

Instrumentation Applications

» Well-Lok Twin Ferrule / Fine-Lok Single

Ferrule Tube Fittings
» Precision Pipe Fittings & Adapters
» Ball Valves
» Needle Valves
» Rising Stem Plug Valves
» Gauge / Root Valves
» Purge & Bleed Valves
» Toggle Valves
» Check Valves
» Micron In Line Filters

Pneumatic Applications

» Stainless Steel Push in Fittings
» Flow Control Regulators
» Quick Exhaust Valves
» Quick Connect Couplings
» Check Valves

Utility Industries Are

» Chemicals & Petrochemicals
» Food, Beverages & Pharmaceuticals
» Hydraulics, Pneumatics & Instrumentations
» Marine
» Oil and Gas Industries
» Power Generation
» Pulp and Paper
» Semiconductor Industry
» Alternative Fuels

Events & Exhibition

High Pressure Banjo Tee Fittings

Home >> Hydraulic Applications >> Tube Fittings as per DIN 2353 > High Pressure Banjo Tee Fittings

General Information

Installation Instructions

Ordering Information

High Pressure Banjo Tee Fittings - THM

Male Stud Thread : Metric (parallel with metal seal DKA to DIN 3852/d4)

SERIES	TUBE O. D. T	MALE STUD THREAD METRICs	Dimensions are in millimeters										RTT in Nm	SEALEXCEL PART NO.	APPROX. WT. Kg per 10pcs.
SERIES	TUBE O. D. T	MALE STUD THREAD METRICs	B1	D3	H	L1	L2	L3	L4	S2	S3	S6	RTT in Nm	SEALEXCEL PART NO.	APPROX. WT. Kg per 10pcs.
L-LIGHT PN 315	6	M 10 x 1	8	14	2.5	27	12	24	10.5	14	17	17	25	THM-6L-10MDKA	0.81
	8	M 12 x 1.5	12	17	3.0	29	14.5	30	14	17	22	19	50	THM-8L-12MDKA	1.4
	10	M 14 x 1.5	12	19	3.0	30	15.5	30	14	19	22	19	60	THM-10L-14MDKA	1.54
	12	M 16 x 1.5	12	21	3.0	33	18	36	16.5	22	27	24	90	THM-12L-16MDKA	2.4
	15	M 18 x 1.5	12	23	3.0	36	20.5	39.5	18.5	27	32	30	110	THM-15L-18MDKA	3.47
	18	M 22 x 1.5	14	27	4.5	37	21	45	21.5	32	32	30	150	THM-18L-22MDKA	4.68
PN 160	22	M 26 x 1.5	16	31	3.5	44	27.5	53	24	36	41	36	350	THM-22L-26MDKA	7.72
	28	M 33 x 2	18	39	3.5	49	32	66	30.5	41	50	46	400	THM-28L-33MDKA	12.38
	35	M 42 x 2	20	49	3.5	58	36	76	35.5	50	60	55	600	THM-35L-42MDKA	20.74
	42	M 48 x 2	22	5	3.5	63	40.5	87	40.5	60	70	60	800	THM-42L-48MDKA	30.48
S Heavy PN 400	6	M 12 x 1.5	12	17	3.0	31	16.5	30	14	17	22	19	50	THM-6S-12MDKA	1.51
	8	M 14 x 1.5	12	19	3.0	31	16.5	30	14	19	22	19	60	THM-8S-14MDKA	1.68
	10	M 16 x 1.5	12	21	3.0	35	18.5	36	16.5	22	27	24	90	THM-10S-16MDKA	2.65
	12	M 18 x 1.5	12	23	3.0	36	18.5	39.5	18.5	24	30	27	110	THM-12S-18MDKA	3.35
	14	M 20 x 1.5	14	25	3.0	40	22.5	43.5	20	27	32	30	130	THM-14S-20MDKA	4.48
	16	M 22 x 1.5	14	27	4.5	40	22	45	21.5	30	32	30	150	THM-16S-22MDKA	4.92
	20	M 27 x 1.5	16	32	3.5	40	26.5	53	24	36	41	36	350	THM-20S-27MDKA	8.48
PN 250	25	M 33 x 2	18	39	3.5	56	31.5	66	30.5	46	50	46	400	THM-25S-33MDKA	15.35
	30	M 42 x 2	20	49	3.5	64	37	76	35.5	50	60	55	600	THM-30S-42MDKA	23.13
	38	M 48 x 2	22	55	3.5	72	41.5	87	40.5	60	70	60	800	THM-38S-48MDKA	34.3

RTT- Recommended tightening torque for male stud BSP
O-Ring : Buna-N is standard
Viton® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings Example : THM-6L-10MDKA/ELV
Soft Seal : PTFE
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change without notice.

Suffixes the following material code along with above part number while sending your enquiries / orders.

Material	Code	Example
SS316L	EL	THM-6L-10MDKA/EL
SS304	I	THM-6L-10MDKA/I
The material SS316Ti are available on request

Request a Quote for - High Pressure Banjo Tee Fittings - THM

Swagelok®, Parker A-Lok®, Parker CPI®, and Hoke Gyrolok® are the registered trademarks of their respective owners.