Single Ferrule Compression Tube Fittings

» General Information
» Product Range

PNEUMATIC CHECK VALVES SERIES CV01

» Pneumatic Check Valves

SEALEXCEL^® Stainless Steel Check Valves are of Compact and Precise in Design to Provide Single Direction Flow for low pressure application.

Operation : SEALEXCEL^® Stainless Steel Check Valves shut the fluid passage when the Pressure difference is below 0.25 Bar.

Available Size	:	1/8" to 1/2" Pipe Threads
Pressure Rating	:	0.5 to 40 Bar
Temperature Rating	:	Up to 180ºC
End Connections	:	BSP/BSPT/NPT/SAE Straight threads.

» Request a Quote for Pneumatic Check Valves

» Stainless Steel Quick Exhaust Valves

Stainless Steel Quick Exhaust Valves: These Valves allows direct Exhaust of Compressed air due to increase of Cylinder rod displacement speed, this result in reduction of cycle time.

Available Size	:	1/8" to 1/2" Pipe Threads
Pressure Rating	:	Up to 10 Bar
Temperature Rating	:	Up to 120ºC

Sealing Material

Pipe Thread Size upto 1/4"	:	Viton^®
Pipe Thread Size above 1/4"	:	Polyeurathene
End Connections	:	BSP/BSPT/NPT/SAE Straight threads.

» Request a Quote for Stainless Steel Quick Exhaust Valves

INSTRUMENTATION CHECK VALVES SERIES CV03

» Overview

SEALEXCEL^® Check Valves Series-CV03 are carefully Designed and manufactured for uni-directional flow control of Fluids and gases to meet the growing demand in Industries such as Chemical processing, Oil and gas production and transmission, pulp and paper, power and utilities etc. This Check Valve is particularly suitable for application requiring high integrity leak rates and re-sealing capabilities.

» Features

» Available in Material SS 316 with Heat Traceability
» Variety of end connection
» 100% Factory tested for Crack and reseal performance.
» The cracking pressure include 1/3 to 25 PSIG (0.02 to 1.7 Bar)

» Operating Parameters

Seal Excel

Available Size	:	1/8" to 1"
Pressure Rating	:	Up to 5000 PSI
Temperature Rating	:	Up to 204°C (depending sealing material)
End Connections	:	Available with Fine-Lok/Well-Lok Tube Fittings, NPT (National Pipe Taper), BSP/ISO (British Standard Pipe/International Standard Organisation).

» Request a Quote for Instrumentation Check Valves Series

Our Product Range - Valves & Fittings
Single/Twin Ferrule Compression Tube Fittings (Fine-Lok^TM / Well-Lok^TM)	Precision Pipe Fittings & Adapters	37 Degree Flared Tube Fittings
Tube Fittings As Per DIN 2353	Stainless Steel Push in Fittings	Quick Connect Couplings
Forged & Bar Stock Body Needle Valves
New Products :- Swivel Joints \| Quick Connect Couplings Series 110 \| Quick Connect Couplings Series 210 Quick Connect Couplings Series 310 \| Pneumatic Flow Control Regulators \| Pneumatic Check Valves Series CV01 Instrumentation Check Valves Series CV03