Features
» Available in SS316
» Bar Stock Body Straight Patterns
» Straight through orifice hence roddable for easy cleaning
» Replaceable seals and seats
» Stem dust seal protect stem from external contamination.
» Packing below the threads prevents lubricant washout.
» Panel mounted feature option
» Gauge ports available
» Variety of end configuration includes SEALEXCEL^® Well-Lok^TM Tube Fittings, Male / Female NPT, BSPT and BSPP pipe connection.
» Orifice size : 0.187" (4.8mm) and 0.250" (6.4mm)
» Every valve is factory tested

Applications
» General Plant Service
» Instrumentation
» Pressure measurement devices
» Venting

Operating Parameters
Pressure Rating : Upto 6000 psig (408 bar) at CWP
Temperature Rating : -29°C to 204°C with PEEK or Acetal seat material and Viton® or Kalrez® O-Rings

Stem Type
SEALEXCEL® Rising Stem Plug Valves are available with non-rotating stem tips which provides positive sealing and maximum soft seat life.



Material of Constructions

No.	Component	Material
1	Bar Handle	SS316
2	Set Screw	SS316
3	Dust Seal	SS316
4	Bonnet	Viton®
5	Lock Nut	SS316
6	Stem Shank	SS316
7	Stem Tip	SS316
8	O-Ring	Viton®
9	Back-up Ring	PTFE
10	Valve Seat	Acetal
11	Body	SS316

Technical Data
Pressure-Temperature Ratings are based on standard stem tip of Viton O-ring and PTFE back-up rings.

Body Material	SS316
Seat	Acetal	Peek	PTFE
Temperature °F(°C)	Working Pressure, (psig (bar)
-20 to 100 (-28 to 37)	6000 (413)	6000 (413)	750 (51.6)
200 (93)	2650 (182)	3000 (206)	625 (43.0)
250 (121)	1000 (68.9)	1600 (110)	450 (31.0)
300 (148)	-	1300 (89.5)	300 (20.6)
350 (176)	-	1200 (82.6)	200 (13.7)
400 (204)	-	1000 (68.9)	100 (6.8)

Temperature Range For O-ring materials
Pressure-Temperature Ratings are based on standard stem tip of Viton® O-ring and PTFE back-up rings.

O-ring Material	Temperature Range °F(°C)
Buna-N	-20 to 250(-28 to 121)
EPDM	-20 to 250 (-28 to 121)
Viton®	-20 to 400 (-28 to 204)
Kalrez®	-20 to 400 (-28 to 204)

Testing
Standard Test : Each valve is factory tested with nitrogen at 1000 psig (69 bar) for leakage at the seat, The maximum allowable leak rate of 0.1 sccm.Stem and body seals are tested to a requirements of no detectable leakage using a liquid