SEALEXCEL® 37 degree flared Tube Fittings is compact and simple in design for assembly and assures maximum reliability and performance. It is especially suited for low and medium wall tubing with good vibration resistance in a broad selection of types and sizes. It is used in virtually every application that uses fluid power for motion control & automation.
SEALEXCEL® 37 degree flared Tube Fittings consist of three precision components such as Body, Sleeve and Nut. These components have been manufactured to very stringent tolerances under rigid quality control procedure approved to ISO 9001: 2015. SEALEXCEL® 37 degree flared Tube Fittings meets SAE J514 Standard.
The Tube end is flared at a 37 degree angle and sandwiched between the fitting body nose (seat) and the sleeve with nut which provide a very effective leakproof joint, full flow connection in process tubing.SEALEXCEL® 37 degree flared Tube Fittings are available as a standard in SS316 material, which meets the following specifications.
A. SS316 BAR STOCK :- ASTM A-479
B. SS316 FORGING :- ASTM A-182
Other materials are available on request.
SEALEXCEL® 37 degree flared Tube Fittings provide zero leak, full flow connection in hydraulic system operating at working pressure as specified below.
Allowable working pressure ratings are based on min. design factor 4:1 for dynamic and 3:1 for static application.
|Nom. Tube O.D Inch||370 Flare Straight Thread||Nom. Pipe Size||SAE St. Threads Union and Bulkhead||Fittings with Pipe Thread|
|1/8||5/16” x 24||1/8”||5000||5000|
|3/16||3/8” x 24||1/8”||5000||5000|
|1/4||7/16” x 24||1/8”||5000||5000|
|5/16||1/2” x 20||1/8”||5000||5000|
|3/8||9/16” x 18||1/4”||5000||5000|
|1/2||3/4” x 16||3/8”||4500||4000|
|5/8||7/8” x 14||1/2”||3500||3000|
|3/4||1-1/16 x 12||3/4”||3500||3000|
|7/8||1-3/16 x 12||3/4”||3000||2500|
|1||1-5/16 x 12||1”||3000||2000|
Available SizesFractional Size : ranges from 1/8” through 1”
Metric Size : ranges from 6mm through 25 mm