Plug

Flare Tube end SAE 070109
PART NUMBER INFORMATION:
  • FLP - Body only
  • FLAP - Assembled Fitting (Body, Sleeve & Nut)
Close all dead ends with the 37º Flare Plug

A Plug is one of the most commonly used components in a hydraulic or pneumatic piping system. It is used to close all dead-ends or plug ends where you feel you may expand at a later point in time. Since pneumatic and hydraulic systems operate at high pressures and flow rates, it is extremely important that the dead-ends are properly plugged and there is no possibility of leakage through these dead-ends. The 37º Flare Plug from Seal Excel is an ideal choice in this regard.

At Seal Excel, we ensure that all the 37º Flare Plugs manufactured are designed to withstand high pressures and temperatures so that even if there is an imbalance in the piping and tubing system, there is no possibility of leakages from the dead-ends. We offer 37º Flare Plugs in various dimensions that are non-corrosive, leak-proof, and extremely easy to install at dead-ends.
 
 
T
Tube OD
B SEALEXCEL PART NO.
inch mm UNF Inches Metric
1/8 - 5/16 x 24 FLP-125 -
3/16 - 3/8 x 24 FLP-187 -
1/4 6 7/16 x 20 FLP-250 FLP-6
5/16 8 1/2 x 20 FLP-312 FLP-8
3/8 10 9/16 x 18 FLP-375 FLP-10
1/2 12 3/4 x 16 FLP-500 FLP-12
5/8 16 7/8 x 14 FLP-625 FLP-16
3/4 18 1-1/16 x 12 FLP-750 FLP-18
7/8 20 1-3/16 x 12 FLP-875 FLP-20
1 25 1-5/16 x 12 FLP-1000 FLP-25
Dimensions are for reference only and are subject to change