High Pressure Banjo Fittings THM

MALE STUD THREAD : Metric (parallel with metal seal DKA to DIN 3852/d4)

SERIES	TUBE O.D. T	MALE STUD THREAD METRIC	DIMENSIONS ARE IN MILLIMETERS										RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
SERIES	TUBE O.D. T	MALE STUD THREAD METRIC	B₁	D₃	H	L₁	L₂	L₃	L₄	S₂	S₃	S₆	RTT in NM	SEALEXCEL PART NO.	APPROX. WT KG PER 10 PCS
L-Light PN 315	6	M 10 x 1	8	14	2.5	27	12	24	10.5	14	17	17	25	THM-6L-10MDKA	0.81
	8	M 12 x 1.5	12	17	3.0	29	14.5	30	14	17	22	19	50	THM-8L-12MDKA	1.40
	10	M 14 x 1.5	12	19	3.0	30	15.5	30	14	19	22	19	60	THM-10L-14MDKA	1.54
	12	M 16 x 1.5	12	21	3.0	33	18	36	16.5	22	27	24	90	THM-12L-16MDKA	2.40
	15	M 18 x 1.5	12	23	3.0	36	20.5	39.5	18.5	27	32	30	110	THM-15L-18MDKA	3.47
	18	M 22 x 1.5	14	27	4.5	37	21	45	21.5	32	32	30	150	THM-18L-22MDKA	4.68
PN 160	22	M 26 x 1.5	16	31	3.5	44	27.5	53	24	36	41	36	350	THM-22L-26MDKA	7.72
	28	M 33 x 2	18	39	3.5	49	32	66	30.5	41	50	46	400	THM-28L-33MDKA	12.38
	35	M 42 x 2	20	49	3.5	58	36	76	35.5	50	60	55	600	THM-35L-42MDKA	20.74
	42	M 48 x 2	22	5	3.5	63	40.5	87	40.5	60	70	60	800	THM-42L-48MDKA	30.48
S-Heavy PN 400	6	M 12 x 1.5	12	17	3.0	31	16.5	30	14	17	22	19	50	THM-6S-12MDKA	1.51
	8	M 14 x 1.5	12	19	3.0	31	16.5	30	14	19	22	19	60	THM-8S-14MDKA	1.68
	10	M 16 x 1.5	12	21	3.0	35	18.5	36	16.5	22	27	24	90	THM-10S-16MDKA	2.65
	12	M 18 x 1.5	12	23	3.0	36	18.5	39.5	18.5	24	30	27	110	THM-12S-18MDKA	3.35
	14	M 20 x 1.5	14	25	3.0	40	22.5	43.5	20	27	32	30	130	THM-14S-20MDKA	4.48
	16	M 22 x 1.5	14	27	4.5	40	22	45	21.5	30	32	30	150	THM-16S-22MDKA	4.92
	20	M 27 x 1.5	16	32	3.5	48	26.5	53	24	36	41	36	350	THM-20S-27MDKA	8.48
PN 250	25	M 33 x 2	18	39	3.5	56	31.5	66	30.5	46	50	46	400	THM-25S-33MDKA	15.35
	30	M 42 x 2	20	49	3.5	64	37	76	35.5	50	60	55	600	THM-30S-42MDKA	23.13
	38	M 48 x 2	22	55	3.5	72	41.5	87	40.5	60	70	60	800	THM-38S-48MDKA	34.30

RTT = Recommended tightening torques for male stud BSP
O-Ring : Buna-N is standard
Viton^® are available on request
For Viton: Suffix code 'V' alongwith the part number of the fittings
Example : THM-6L-10MDKA/ELV
Dimension L1 is approximate length with tightened nut.
The above part numbers are for complete fittings including Nut, Bite Ring and Body.
Only body without Nut and Bite Ring are available on request.
If you have requirements other than above size and Dimensions, please contact us with complete details
Dimensions are for reference only and are subject to change.

Suffixes the following material code along with above part number while sending your enquiries / orders.
Material	Code	Example
SS316L	EL	THM-6L-10MDKA/EL
SS304	I	THM-6L-10MDKA/I
The material SS316Ti are available on request

High Pressure Banjo Tee Fittings – THM