Micron In-Line Filters

Micron In-ine Filters : Series - MLF01

FEATURES

  • Available in SS316
  • Heat Code Traceable to certified material test report
  • Remove system particulate contaminants
  • Inline Filters are for use where space is limited
  • Replaceable filter elements
  • Variety of end configurations includes SEALEXCEL® Well-Lok™  Tube Fittings, Male/Female NPT, BSPT and BSPP pipe connection

OPERATING PARAMETERS

  • Pressure Rating : upto 3000 psig (206 bar) at CWP
  • Temperature Rating : -28ºC to 482ºC

TEMPERATURE AND PRESSURE RATING

Material SS 316
Orifice Size 2.4mm & 4.8mm 7.1mm & 10.4mm
Temperature F( C) Working pressure psig(bar)
-20(-28) to 100(37) 3000(204) 2500(172)
200(93) 2580(176) 2150(148)
300(148) 2330(160) 1940(133)
400(204) 2140(147) 1780(122)
500(260) 1990(137) 1660(114)
600(315) 1880(129) 1560(107)
650(343) 1845(127) 1540(106)
700(371) 1800(124) 1500(103)
750(396) 1760(121) 1460(100)
800(426) 1725(118) 1440(99.2)
850(454) 1690(116) 1410(97.1)
900(482) 1640(112) 1360(93.7)

EFFECTIVE FILTRATION AREA

Orifice Size mm Effective Filtration Area in (mm ) Sintered
2.4 0.55(350)
4.8 1.3(830)
7.1 & 10.4 2.0(1280)


FILTER ELEMENTS

Nominal Pore Size µm Pore Size Range µm
0.5 0.5 to 2
2 1 to 4
7 5 to 10
15 11 to 25
60 50 to 75
90 75 to 100

MATERIAL OF CONSTRUCTIONS

No. Component Material
1 Inlet Body SS316
2 Outlet Body SS316
3 Filter Elements SS316-Sintered
4 Gasket Silver Plated SS316
5 Spring SS34

FLOW DATA AT 70ºF (20ºC)

Nominal Element Pore Size mm Inlet Pressure psig(bar) Pressure Drop psig (bar)
5 (0.34) 10(0.68) 15(1.0) 10(0.68) 50(3.4) 100(6.8)
2.4 4.8 7.1,10.4 2.4 4.8 7.1,10.4 2.4 4.8 7.1,10.4 2.4 4.8 7.1,10.4 2.4 4.8 7.1,10.4 2.4 4.8 7.1,10.4
Air Flow, ft /min Water Flow, ft /min
0.5 0.04 0.12 0.36 0.06 0.26 0.86 0.12 0.48 1.6 0.001 0.005 0.012 0.005 0.023 0.053 0.016 0.039 0.102
2 0.20 0.6 1.4 0.40 1.4 2.8 0.60 2.3 4.0 0.01 0.032 0.035 0.032 0.115 0.147 0.053 0.174 0.214
7 0.50 1.4 1.8 0.90 2.9 4.2 1.2 4.7 6.8 0.013 0.053 0.086 0.04 0.174 0.294 0.064 0.267 0.468
15 0.80 1.2 1.8 1.3 2.9 4.9 1.5 4.7 7.9 0.016 0.067 0.112 0.048 0.174 0.348 0.078 0.28 0.548
60 1.7 3.1 5.1 2.2 5.9 10 2.4 8.5 15 0.02 0.12 0.267 0.067 0.441 0.896 0.094 0.615 1.337
90 1.8 4.0 6.1 2.2 7.5 11 2.6 10 16 0.027 0.16 0.307 0.067 0.561 1.02 0.08 0.815 1.47

STANDARD CONFIGURATION DIMENSIONS

End Connections Orifice (mm) Dimensions mm Ordering Number
Inlet Outlet H I L
1/8" Well-Lok 2.4 14.3 29.2 59.7 MLF01-TT2
1/4" Well-Lok 4.8 19.0 39.7 75.2 MLF01-TT4
3/8" Well-Lok 7.1 25.4 43.2 81.8 MLF01-TT6
1/2" Well-Lok 10.4 25.4 43.2 86.9 MLF01-TT8
3mm Well-Lok 2.4 14.3 29.2 60.5 MLF01-TT3M
6mm Well-Lok 4.8 19.0 39.7 75.2 MLF01-TT6M
10mm Well-Lok 10.4 25.4 43.2 82.2 MLF01-TT10M
1/8" Male NPT 2.4 14.3 29.2 48.6 MLF01-MM2N
1/4" Male NPT 4.8 19.0 39.7 68.3 MLF01-MM4N
3/8" Male NPT 7.1 25.4 43.2 71.6 MLF01-MM6N
1/8" Female NPT 2.4 14.3 29.2 54.9 MLF01-FF2N
1/4" Female NPT 4.8 19.0 39.7 72.9 MLF01-FF4N
3/8" Female NPT 7.1 25.4 43.2 77.2 MLF01-FF6N
Dimensions shown with SEALEXCEL® Well-Lok™ Nut are finger tight
Dimensions are for reference only and are subject to change without Notice